I am building a gas mixer for gopher control. The mechanics of the gas side
have been taken care of with double flashback arrestors in each line ($100
per line) and premium Whitey 90 degree valves.

What I need is a piezo igniter, but one that gives more than one spark. I
want to hold down the button, and the spark will continue as long as I hold
the button. Like a stun gun. (Which I have and am considering altering.)

Can anyone direct me to a site that sells such piezo devices, or provide
simple directions to making one?

Help on the basics appreciated.

Steve

On Tue, 07 Aug 2007 21:38:53 -0600, SteveB wrote:

> I am building a gas mixer for gopher control. The mechanics of the gas side
> have been taken care of with double flashback arrestors in each line ($100
> per line) and premium Whitey 90 degree valves.
>
> What I need is a piezo igniter, but one that gives more than one spark. I
> want to hold down the button, and the spark will continue as long as I hold
> the button. Like a stun gun. (Which I have and am considering altering.)
>
> Can anyone direct me to a site that sells such piezo devices, or provide
> simple directions to making one?
>
> Help on the basics appreciated.
>

Try http://www.google.com/search?q=stun-gun-schematic

Or you could go to an HVAC place and look for an igniter of some
kind, or maybe electric stove makers.

Good Luck!
Rich

--Use a stun gun; they're great for this and cheap, too.

--
"Steamboat Ed" Haas : A steaming pile of
Hacking the Trailing Edge! : obscure information...
http://www.nmpproducts.com
---Decks a-wash in a sea of words---